螺桿真空泵廠家直銷--珂勒曦
浙江珂勒曦動力設備有限公司是一家專業的空氣動力設備制造商，擁有16年鼓風機、真空泵、空壓機設備銷售及維護維修經驗。螺桿真空泵廠家直銷，珂勒曦螺桿真空泵生產的產品擁有實用專利技術，突破單級0.1pa極限真空，適用場合廣泛，一般環境和特殊環境（粉塵、高抽速、低音等）。珂勒曦螺桿真空泵擁有核心主機制造技術，檢測平臺，為您提供高效穩定、節能環保的真空泵產品。如果您對珂勒曦螺桿真空泵感興趣或想了解更多信息，歡迎留言咨詢或撥打珂勒曦全國免費客服熱線：400-886-7766，期待您的來電。
全國銷售熱線：400-886-7766
傳 真：
網 址：www.kelexi.cn
地 址：浙江省臨海市江南街道江南大道288號
郵 箱：3052127932@qq.com
真空泵供應神港精機真空泵
| 我司代理日本神港精機（SHINKO）真空泵，油回轉式/羅茨式/干式/水封式等系列。 | |||||||
| 一 油回轉式【特 征】 | |||||||
| 1. 耐久性強,壽命長 | |||||||
| 2. 排氣性,操作簡單 | |||||||
| 3. 可以處理水蒸氣 | |||||||
| 4. 內有氣鎮閥,防止凝結性氣體凝結,與油混合,引起性能降低 | |||||||
| 5. 可以進行凝結性氣體的排氣處理 | |||||||
青浦區白鶴鎮哪里有賣ZJ型羅茨真空泵的？
| 上海飛魯真空泵廠有限公司專業生產銷售ZJ型羅茨真空泵,歡迎您來電選購ZJ型羅茨真空泵,咨詢ZJ型羅茨真空泵價格,ZJ型羅茨真空泵詳細信息,我們將為您提供ZJ型羅茨真空泵的全面服務,全國免費咨詢熱線400-021-5161. 一、ZJ型羅茨真空泵概述： ZJ型羅茨真空泵是一種旋轉式變?nèi)菡婵毡茫畲髢?yōu)點是在較低入口壓力時具有較高的抽氣速率，但它不能單獨使用，必須有一臺前級真空泵串聯，待被抽系統中的壓力被前級真空泵抽到羅茨真空泵允許人口壓力時，ZJ羅茨真空泵才能開始工作，并且在一般情況下，羅茨真空泵不允許高壓差時工作，否則將會過載和過熱而損壞，因此使用羅茨真空泵時必須合理地選用前級真空泵，安裝必要的保護設備。 前級真空泵一般為油封機械泵，但如果極限壓力要求不高時，可選用其他形式的粗真空泵作為前級泵。特別在抽除有大量水蒸汽的氣體時，選用水環真空泵作為前級泵是很理想的，當然所能達到的極限壓力要差些。羅茨泵廣泛用于真空冶金工業的真空脫氣、真空熔煉、鋼水真空處理，以及空間模擬、低密度風洞等裝置中抽除非腐蝕性氣體。也可以用于化工、食品、醫藥、電機制造等工業的蒸餾、蒸發、干燥等生產過程。 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 二、ZJ型羅茨真空泵特點： 1、轉子與泵腔、轉子與轉子之間有一定的間隙，互不接觸，不需要用油潤滑。 2、ZJ型羅茨真空泵工作時振動小，容積大，容積利用系數＝0.5左右。 3、在泵腔內并不發生像機械真空泵那樣的壓縮現象，因此它不需要排氣閥。也正因如此，可抽除可凝性蒸汽。 4、ZJ型羅茨真空泵啟動快，能夠在短時間內達到極限真空。功率小，運轉維護費用低。 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 三、ZJ型羅茨真空泵工作原理： | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ZJ型羅茨真空泵工作時，被抽氣體由吸入口進入轉子與泵體之間，這時一個轉子和泵體把氣體與進氣口隔開，被隔開的氣體（如圖上影線部分所示），在轉子連續不斷地旋轉過程中，被送到排氣口。ZJ型羅茨真空泵空間是處在封閉狀態，因此，沒有壓縮和膨脹。但當轉子的峰部轉到排氣口邊緣時，由于V部分的壓力較之排氣口處的壓力低，為了使相連體積內壓力均勻，氣體就會從排氣口處擴散到V區域，其擴散方向與轉子旋轉方向相反。當ZJ型羅茨真空泵轉子再轉動時，把V處的氣體壓縮到排氣口將其排出。這時轉子的另一面與進氣口相連部分則吸入氣體，當轉子不斷地旋轉時，重復上述抽氣過程不斷地排出流進來的氣體。ZJ型羅茨真空泵這種工作過程相當于轉子空間由某一最小值增加到最大值，然后再由最大值減小到最小值。 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 四、ZJ型羅茨真空泵的性能參數表： | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 注：上表所列極限壓力值為該羅茨真空泵配用合適抽氣速率的旋片真空泵或滑閥真空泵作為前級泵時所測得的極限壓力，如采用水環真空泵、油環真空泵作為前級泵時，其極限壓力會高于該值，其具體參數請參照羅茨水環真空機組。 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 相關閱讀：ZJ型羅茨真空泵安裝尺寸圖 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 其他真空泵類產品導讀：2X型旋片式真空泵、2XZ型旋片式真空泵、XD型旋片式真空泵、WX型無油旋片式真空泵 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2BV型水環式真空泵、2BE型水環式真空泵、SK型水環式真空泵、SK型懸臂式水環真空泵、 2SK型水環式真空泵、SZ型水環式真空泵、SZB型水環式真空泵、ZJ型羅茨真空泵、ZJP型羅茨真空泵、 羅茨水環真空機組、羅茨旋片真空機組 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
真空泵：http://www.flvpw.com/真空機組：http://www.flvpw.com/水環式真空泵：http://www.021vp.com/旋片式真空泵：http://www.021vp.com/
潛水排污泵：http://www.flpwb.com/
電動隔膜泵：http://www.flgmb.com/
真空泵
真空泵
2XZ-系列旋片真空泵介紹具有結構緊湊，體積小、重量輕、噪音低、振動小等優點。所以，它適用于作擴散泵的前級泵，而且更適用于精密儀器配套和實驗室使用。例如：質譜儀器，冰箱流水線，真空冷凍干燥機等。
性能表
水環式真空泵（庫存特價促銷） 型號wi244550
水環真空泵及壓縮機是用來抽吸或壓縮空氣和其它無腐蝕性，不溶性，不溶于水，不含有固體顆粒的氣體，以便在密閉溶器中形成真空和壓力。吸入氣體允許混有少量液體。水環真空泵及壓縮機被廣泛應用于機械，石油化工，制藥，食品，制糖工業及電子領域。由于在工作過程中，氣體的壓縮過程是等溫的，所以在壓縮和抽吸易爆炸氣體時，不易發生危險，所以其應用更另廣泛。性能參數：抽氣量（M3/MIN）最大：1.5吸入壓力：-0.04MPA最大（-450mmHg）真空泵極限壓力-680mmHG/-0.091MPa電機功率（KW）真空泵：4壓縮機：4泵轉速（轉/分）：1440壓縮機壓力：0-0.1MPa口徑（MM）進：70MM出：70MM
GM-0.33A型隔膜真空泵
| 抽氣速度（L/Min） | 20 | 泵頭 | 1 |
| 極限壓力 真空度 | >=0.08Mpa 200mbar | 電壓 | 230Vac, 50Hz |
| 尺寸 （L x B x H）（ｍｍ） | 215×120×235 | 泵體溫度（℃） | <55 |
| 電機功率（W） | 160 | 重量（Kg） | 7.5 |
| 接口 進氣口（mm） 出氣口（mm） |
φ6 消音器 | 噪音（dB） | <50 |
| 工作溫度（℃） | 7—40 | 備注 | 負壓型 |
DZF-6090真空干燥箱（含真空泵）
產品特點
·長方體工作室，使有效容積達到最大，微電腦溫度控制器控溫精確可靠。
·鋼化、防彈雙層玻璃門觀察工作室內物體，一目了然，能夠向內部充入惰性氣體。
·箱門閉合松緊能調節，整體成型的硅橡膠門封圈，確保箱內高真空度。
·工作室采用不銹鋼板（或拉絲板）制成，確保產品經久耐用。
·儲存、加熱、試驗和干燥都是在沒有氧氣或者充滿惰性氣體環境里進行，所以不會氧化。
·最短加熱時間，與傳統真空干燥箱相比加熱時間減少50%以上。
技術參數： 電源電壓：220V 50Hz 輔入功率：1400w 控溫范圍：RT+10-250℃ 溫度分辨率/波動度：0.1℃/±0.5℃ 達到真空度：133pa 工作環境溫度：+5-40℃ 內膽尺寸（mm）W×D×H ：450×450×450 外形尺寸（mm）W×D×H：615×590 ×1470 擱板：2塊 工作室材料：不銹鋼 真空度測量、設定范圍O - 99.99KPa， 定時范圍0- 9999分鐘， 測量值基本誤差<0。5% 2段真空度設定，每段可分別設定運行時間運行結束后自動放氣， 運行過程中可手動放氣電磁閥啟動延時功能。
KTS宇野澤真空泵
Edwards旋片式真空泵－－-Edwards愛德華EM 系列：
E1M5, E1M8, E1M12, E1M18, E1M30, E1M40, E1M80, E1M175, E1M275,
E2M0.7, E2M1.5, E2M18,E2M28, E2M40, E2M80, E2M175, E2M275
Edwards旋片式真空泵－－-Edwards愛德華RV系列：
RV3, RV5, RV8, RV12Edwards羅茨泵 －－-Ewards愛德華EH 系列：
Edwards愛德華EH 系列：EH250, EH500, EH1200, EH2600, EH4200Edwards干式真空泵－－-Edwards愛德華GXS螺桿真空泵系列：
GV80，GXS160， GXS250， GXS400
Edwards－－-真空配件
愛德華E2M175,E2M275,E2M28,E2M18,E2M30,E2M40,RV12,RV8進口真空泵配件,過濾器,葉片,大修包,小修包
愛德華真空泵滑片,旋片,葉片, 刮片,碳精片,碳片愛德華真空泵配件，密封墊，O型圈，軸承,軸封,軸套,葉片,密封件,墊片,維修包，密封包愛德華真空泵空氣過濾器,愛德華真空泵空氣過濾芯,愛德華真空泵油霧過濾器,愛德華真空泵油氣分離器,愛德華真空泵油氣分離芯,愛德華真空泵排氣過濾器愛德華真空泵油過濾器
島津色譜質譜儀真空泵油及真空系統配件
島津色譜質譜儀真空泵油及真空系統配件
KINLYVAC島津泵油 PUMP OIL 017-30163-01 ，機械泵油霧過濾器
SHIMADZU島津泵油 PUMP OIL, 017-30163-02，機械泵配件
島津泵油 PUMP OIL, 017-30159-03 ，機械泵密封包
島津泵油 PUMP OIL, 260-21701-03，機械泵分子泵配件
GR進口水環式真空泵(歐美進口品牌)
| 名稱： | 進口水環式真空泵 | |
| 壓力： | 1.6MPa | |
| 型號： | GR | |
| 口徑： | DN25-DN300 | |
| 材質： | 鑄鐵、不銹鋼 |
- 質量：從鑄件到產品，實行全過程質量監控，全方位檢測，責任到人！
- 價格：高效成本控制，自產自銷，減少中間環節，讓利于客戶！
- 交貨：充足的庫存，上海便捷物流，縮短交貨期，嚴格按照合同期交貨！
英國GRIMM格林進口水環式真空泵 UK GRIMM Imported water ring vacuum pump
英國GRIMM格林進口水環式真空泵概述：
進口水環真空泵及壓縮機是用來抽吸或壓送氣體和其它無腐蝕性、不溶于水、不含固體顆粒的氣體，以便在密閉容器中形成真空或壓力，滿足工藝流程要求，吸入或壓送的氣體中允許混有少量的液體。
英國GRIMM格林進口水環式真空泵工作原理：
葉輪偏心地安裝在泵體內，因此當葉輪旋轉時，水受離心力的作用而在泵體內壁形成一旋轉水環，水環上部?jī)?nèi)表面與輪轂相切沿箭頭方向旋轉，在前半轉過程中，水環內表面逐漸與輪轂脫離，因此在葉輪葉片間與水環形成封閉空間，隨著葉輪的旋轉，該空間逐漸擴大，空間氣體壓力降低，氣體被及入空間；在后半轉過程中，水環內表面漸漸與輪轂靠近，葉片間的空間逐漸縮小，空間氣體壓力升高，高于排氣口時，葉片間的氣體被排出。如此葉輪每轉動一周，葉片間的空間吸排一次，許多空間不停地工作，泵就連續不斷地抽吸或壓送氣體。
由于在工作過程中，做功產生熱量，會使工作水環發熱，同時一部分水和氣體一起被排走，因此，在工作過程中，必須不斷地給泵供水，以冷卻和補充泵內消耗的水，滿足泵的工作要求。
當泵排出的氣體不再利用時，在泵排氣一端接有氣水分離器（可自己制作一水箱代替），廢水和所帶的部分水排入氣水分離器后，氣水分離，氣體由排氣管排出，留下的水經回水管供至泵內繼續使用。隨著工作時間的延長，工作水溫度會不斷地升高，這時需從氣水分離器供水處供給一定的冷水（自來水），以降低工作水的溫度，保證泵能達到所要求的技術要求和指標。
當作為壓縮機使用時，泵排氣口接有氣水分離器，氣水混合物進入氣水分離器后自動分離，氣體由排氣管輸送到所需系統而工作水經過自動溢于開關放出，壓縮氣體時，工作水極易發熱，水由泵出口排出，溫度會變得較高，因此在氣水分離器的底部，要不斷地供給冷水，以補充被放走的熱水，同時起冷卻作用，使工作水溫度不致過高，從而保證壓縮機性能，達到技術指標，滿足工藝要求。
英國GRIMM格林進口水環式真空泵結構說明：
進口水環式真空泵由泵體、兩個端蓋、葉輪、軸等部件組成。進氣管和排氣管通過安裝在端蓋上的園盤上的吸氣孔和排氣孔與泵腔相連，軸偏心地安裝在泵體中，葉輪用平鍵固定在軸上。水環式真空泵兩端面的總間隙由泵體和園盤之間的墊來調整，葉輪與端蓋上的園盤之間的間隙由軸套（SK-1.5/3/6）或背帽（SK-12/20/30）推動葉輪來調整，而SK-42以上軸與葉輪為過盈配合，此間隙由前端定位時確定，SK-42/60/85/120無軸套，其余結構與SK-6/12/20/30相同。葉輪兩端面與端蓋園盤的間隙決定氣體在泵腔內由進氣口至排氣口流動中損失的大小及極限壓力。
進口水環式真空泵填料安裝在兩端蓋內，密封不經由端蓋中的小孔進入填料中，冷卻填料及加強密封效果。葉輪形成水環所需的補充水由供水管供給，供水管可與氣水分離器連在一起循環供水。
SK型水環式真空泵密封形式采用機械密封，機械密封安裝在填料空腔里，填料省略。填料壓蓋換成機械密封壓蓋，其余結構相同。
軸承由園螺母固定在軸上。
進口水環式真空泵在端蓋上安裝有園盤，園盤上設有吸、排氣孔和橡膠球閥。橡膠球閥的作用是當葉輪葉片間的氣體壓力達到排氣壓力時，在排氣口以前就將氣體排出，減少了因氣體壓力過大而消耗的功率，從而降低功率消耗。
英國GRIMM格林進口水環式真空泵技術參數：
最大抽氣量：0.15-120m3/min水 耗 量：(4-5)～(220-260)L/min進出口口徑：25-300mm極限真空度：0.091-0.098MPa轉 速：590-2900r/min功 率：0.81-185kw
英國GRIMM格林進口水環式真空泵適用范圍：
廣泛應用于機械、石油、化工、制藥、食品、陶瓷、制糖、印染、冶金等行業。由于在工作過程中，該泵對氣體的壓縮過程是在等溫狀態下進行的，因此在壓送和抽吸易燃、易爆氣體時，不易發生危險，所以其應用更加廣泛。
UK GRIMM Imported water ring vacuum pump summary:
Imported water ring vacuum pumps ａnd compressors are used to pump or press gas ａnd other gases without corrosion, insoluble ａnd non solid particles, so as to form a vacuum or pressure in a closed container to meet the requirements of the process flow. A small amount of liquid is allowed to be mixed in the gas that is inhaled or pressed.
UK GRIMM Imported water ring vacuum pump working principle:
The impeller is eccentrically installed in the pump body, so when the impeller rotates, the water is driven by the centrifugal force ａnd forms a rotating water ring on the inner wall of the pump body. The inner surface of the upper part of the water ring rotates along the arrow direction tangent to the hub, ａnd the inner surface of the water ring is gradually separated from the hub during the first half process, because this forms the closure between the impeller blades ａnd the water ring. In space, with the rotation of the impeller, the space gradually expands, the pressure of the space gas is reduced ａnd the gas is entered into the space. In the back half process, the inner surface of the water ring is gradually close to the hub, the space between the blades gradually diminishing, the pressure of the space gas rises, ａnd the gas between the blades is discharged when it is higher than the vent. Every time the impeller rotates one week, the space between the blades is sucked up once, ａnd many spaces work continuously, ａnd the pump continuously suck or pressurized the gas.
In the process of work, doing work to produce heat, will make the working water ring heat, while a part of the water ａnd gas are discharged together, therefore, in the working process, the pump must be continuously supplied to the pump to cool ａnd supplement the water consumed in the pump to meet the work requirements of the pump.
When the gas of the pump is no longer used, there is a gas water separator at the end of the pump (which can be replaced by a water tank.) the waste water ａnd the part of the water are discharged into the gas water separator. The gas ａnd water are separated, the gas is discharged from the exhaust pipe, ａnd the water left behind is supplied to the pump to continue to use. With the prolongation of working time, the temperature of the working water will increase continuously. At this time, a certain cold water (tap water) should be supplied from the water separator of the gas water separator in order to reduce the temperature of the working water, so as to ensure that the pump can meet the required technical requirements ａnd indicators.
When used as compressor, the exhaust port of the pump is connected with a gas water separator, the gas water mixture enters the gas water separator ａnd automatically separates. The gas is transported from the exhaust pipe to the required system ａnd the working water is discharged automatically through the switch. When the gas is compressed, the working water is extremely hot, the water is discharged from the pump outlet ａnd the temperature will become higher because of the water. At the bottom of the gas water separator, it is necessary to supply cold water continuously to supplement the hot water that has been released, ａnd to cool the working water, so that the working water temperature is not too high, thus ensuring the performance of the compressor, reaching the technical index, ａnd meeting the technical requirements.
UK GRIMM Imported water ring vacuum pump structure description:
The imported water ring vacuum pump is composed of pump body, two end covers, impeller, shaft ａnd other components. The intake ａnd exhaust pipes are connected to the pump cavity by the suction hole ａnd the exhaust hole installed on the disc of the end cover. The shaft is installed in the pump body eccentrically, ａnd the impeller is fixed on the shaft with a flat key. The total gap between the two end surfaces of the water ring vacuum pump is adjusted by the cushion between the pump body ａnd the disc. The clearance between the impeller ａnd the end cap is adjusted by the SK-1.5/3/6 or the back cap (SK-12/20/30), ａnd the above axis of the SK-42 is in interference with the impeller. The gap is determined by the front end positioning, ａnd the SK-42/60/85/120 is no shaft. The rest of the structure is the same as that of SK-6/12/20/30. The clearance between the two end faces of the impeller ａnd the end plate determines the size ａnd ultimate pressure of the gas flow in the pump chamber from the intake port to the exhaust port.
The packing of the imported water ring vacuum pump is installed in the two ends of the cover, ａnd the sealing is not entered through the small hole in the end cover, ａnd the cooling filler is reinforced ａnd the sealing effect is enhanced. The replenish water needed for the impeller to form a water ring is supplied by the water supply pipe, ａnd the water supply pipe can be connected with the gas water separator to circulate water supply.
The SK type water ring vacuum pump adopts the mechanical seal in the form of sealing, ａnd the mechanical seal is installed in the packing cavity, ａnd the packing is omitted. The packing gland is replaced by a mechanical seal gland ａnd the rest of the structure is the same.
The bearing is fixed on the shaft by the nut of the garden.
The imported water ring vacuum pump is equipped with a garden disk on the end cover, ａnd there are suction, vent holes ａnd rubber ball valves on the orchard. The effect of the rubber ball valve is that when the gas pressure between the blades of the impeller reaches the exhaust pressure, the gas is discharged before the vent, reducing the power consumed by the excessive pressure of the gas, thus reducing the power consumption.
UK GRIMM Imported water ring vacuum pump technical parameter:
Maximum pumping capacity: 0.15-120m3/min
Water consumption: (4-5) ~ (220-260) L/min
Import ａnd export caliber: 25-300mm
Limit vacuum degree: 0.091-0.098MPa
Speed: 590-2900r/min
Power: 0.81-185kw
UK GRIMM Imported water ring vacuum pump scope of application:
Widely used in machinery, petroleum, chemical, pharmaceutical, food, ceramics, sugar, printing ａnd dyeing, metallurgy ａnd other industries. In the process of working, the compression process of the pump is carried out in an isothermal state, so it is not easy to be dangerous when flammable ａnd explosive gas is pressed ａnd pumped, so its application is more extensive.
進口水環式真空泵：http://www.021fmc.cn/aspcms/product/2018-5-10/1355.html
GRIMM中國：
上海秉奇閥門有限公司為GRIMM公司在中國的總代理，是中國擁有GRIMM代理權及銷售權，主要為中國地區客戶提供服務與技術支持，同時，秉奇人員也積極參與總部技術培訓學習，并不斷掌握產品原理、實際運作、工程技術做為基石，完善對中國地區客戶需求。
關于GRIMM：
英國格林（GRIMM）國際有限公司是亞太地區流體控制領域的主要生產和供應商之一，公司總部位于克萊福德，擁有一支有經驗的研發隊伍，實行全球統一設計，統一標準，在水泵領域內處于ling先地位。在許多個國家均有生產水泵基地，中國由上海秉奇閥門負責中國市場各項業務與技術支持中心，同時向中國市場銷售。
英國格林（GRIMM）產品已廣泛應用于市政給排水、建筑、石油、化工、液化氣、食品、制藥、發電、冶金、礦產、鍋爐蒸汽系統、壓力容器、原子能、航空、火箭等各領域，以及人們?nèi)粘Ｉ钪小?/span>
英國格林（GRIMM）主要產品有：管道泵、離心泵、隔膜泵、磁力泵、真空泵、潛水泵、排污泵、計量泵、衛生級泵、羅茨風機等系列產品。
服務體系：
GRIMM品質：
GRIMM公司注重產品質量及使用壽命，全部采用先進制造技術和生產設備，并堅持不懈研發新產品，為確保不間斷的全過程質量控制，在生產過程中采用(SPC)過程控制和(TQM)全面質量管理；GRIMM的嚴格規范實現了不讓品質拖節，有效保障產品每個細節達到的性能指標。
GRIMM專業：
掌握核心的流體控制技術，提供市場ling先的產品、服務和解決方案，幫助用戶提高效率，帶來至關重要的基礎設施。
GRIMM服務：
我們與用戶緊密合作，支持一系列系統使用技術和文件報告，提供售前、售中、售后服務和技術支持，有了您的信任與支持，我們將更完善、更高效提供水泵流體技術方案。
GRIMM china:
Shanghai Bingqi Valve Co., Ltd. for GRIMM company general agent in China, is China with GRIMM proxy ａnd sales rights, provide service ａnd technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, ａnd continue to grasp the product principle, practical operation ａnd Engineering Technology based on customer demand, improve the Chinese area.
About GRIMM:
Uk GRIMM International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production ａnd suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump base, China by the Shanghai Bingqi valve, responsible for the Chinese market business ａnd technical support center, while selling to the Chinese market.
Uk GRIMM products have been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, metallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, ａnd people＇s daily life.
Uk GRIMM the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower ａnd other products.
Service system:
GRIMM quality:
GRIMM company pays attention to product quality ａnd service life, all adopt the advanced manufacturing technology ａnd production equipment, ａnd unremittingly research ａnd development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) ａnd total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.
GRIMM major:
Fluid control technology ｍaster core, market leading products, services ａnd solutions that help users improve efficiency, bring critical infrastructure.
GRIMM service:
We work closely with the user, support a series of system using technology ａnd file reports provide pre-sale, sale, customer service ａnd technical support services, with your trust ａnd support, we will be more perfect ａnd more efficient to provide technical solutions of fluid pump.
英國格林總代理商：上海秉奇閥門有限公司，微信咨詢：
Uk GRIMM total agents: Shanghai Bingqi Valve Co., Ltd., WeChat Advisory:
Welcome new ａnd old customers call negotiate!
Contacts：Huang Tianxiang
QQ：673088832
Mobile Phone:13524269805 (微信同號）
Company Phone:
Add:Lane 51, dragon road, Shanghai, Xuhui District
最新產品
- VOITH轉換器DSG-B07212 2025/8/22 22:53:40
- Dumont鑷子0208-55-PO 2025/8/22 22:57:48
- Dumont鑷子0203-55-PO 2025/8/22 22:55:48
- Dumont鑷子0103-55-PO 2025/8/22 22:53:47
- Dumont鑷子0102-55-PO 2025/8/22 22:51:46
- Dumont鑷子0209-7-PO 2025/8/22 22:49:46
- Dumont鑷子0208-7-PO 2025/8/22 22:47:45
- Dumont鑷子0203-7-PS 2025/8/22 22:45:45
- Dumont鑷子0203-7-PO 2025/8/22 22:43:44
- Dumont鑷子0109-7-PO 2025/8/22 22:41:44
- Dumont鑷子0103-7-PO 2025/8/22 22:39:43
- Dumont鑷子0102-7-PO 2025/8/22 22:37:43
- Dumont鑷子0101-7-PO 2025/8/22 22:35:42
- VIVOIL泵9M202EGA4545 2025/8/22 22:30:43
- Dumont鑷子0304-5-PO 2025/8/22 22:33:42
- Dumont鑷子0303-5-PO 2025/8/22 22:31:42
- Dumont鑷子0302-5-PO 2025/8/22 22:29:41
- Dumont鑷子0209-5-PS 2025/8/22 22:27:40
- Dumont鑷子0209-5-PO 2025/8/22 22:25:40
- Dumont鑷子0208-5-PS 2025/8/22 22:23:39
- Dumont鑷子0208-5-PO 2025/8/22 22:21:39
- Dumont鑷子0203-5-PS 2025/8/22 22:19:38
- VICKERS閥KBCG-3-350D-Z-M1-2-A-PE7-H1-11 2025/8/22 22:14:15
- Dumont鑷子0203-5-PO 2025/8/22 22:17:38
- Dumont鑷子0109-5-PO 2025/8/22 22:15:37
- Dumont鑷子0108-5-PO 2025/8/22 22:13:36
- Dumont鑷子0103-5-PS 2025/8/22 22:11:35
- TSUBAKI減速機HMTK0735H30-G5LC 2025/8/22 22:05:24
- Dumont鑷子0103-5-PO 2025/8/22 22:09:34
- Dumont鑷子0101-5-PO 2025/8/22 22:07:34